Job Vacancies at Flex Films Africa Private Limited

  • With the most contemporary technology, Research and development (R&D) capabilities and some of the best brains by its side FlexFilms is the trendsetter for the Art and Science of Converting.
    FlexFilms has set up the global platform for converters , where they can expect more and better every time! Manufacturing in all major continents and enjoying a formidable market presence in over 140 countries, FlexFilms possesses the perfect solution to keep the converting industry much ahead of its time!!!

    Read more about this company

    • Contents
    • Open Jobs
      1. Maintenance Technician
      2. Chiller and Air Compressor Operator
      3. Primary and Secondary Slitter Operator
      4. Shift Technician (Utilities) Mechanical
      5. Winder Operator
    • Method of Application

    Maintenance Technician

    • Job Type Full Time
    • Qualification
    • Experience
    • Location Ogun
    • Job Field Engineering / Technical&nbsp

    Job Description

    • Operation of Utility machines.
    • To maintain daily checklists and log books of all the utilities machines.
    • To attend complaints related to utility.
    • To maintain housekeeping and safety of concerned system.
    • To assist in maintenance at the time of breakdown in utility section.
    • Must perform all work independently and coordinate with Utility shift in charge for smooth operation of Utility System,
    • To maintain daily checklists and log books of all utility machines on daily / periodic basis as per schedule.
    • To attend day to day Utility complaints of inter/intra deptt, under the supervision of shift in charges and to rectify these complaints.
    • To maintain proper housekeeping & 5s and safety in the concerned system

    To take Care of Operation of all utility machines like:

    • Thermic Fluid Heater,
    • Air compressors,
    • Water Treatment Plants,
    • Chillers,
    • Cooling Towers,
    • HVAC System,
    • Fire Hydrant System
    • Vapour Absorption Chillers.
    • Condenser Water Pumping System
    • Chilled Water Pumping System

    go to method of application »

    Chiller and Air Compressor Operator

    • Job Type Full Time
    • Qualification
    • Experience
    • Location Ogun
    • Job Field Engineering / Technical&nbsp

    Job Description
    To take care of Preventive Maintenance of following Utility Equipment like:

    • Centrifugal Chiller (630 Tr ) ,
    • Screw type Air Compressors (352 cfm)
    • Refrigerant type Air Dryer (352 cfm)
    • Thermic fluid heater (30 M kilo-cal/hr)
    • Cooling tower (450 *4 CMH) ,
    • Centrifugal, Screw & gear Pumps,
    • Vapor Absorption Machine (1000 Tr ) ,
    • Air handling unit (30000,24000.8000 cfm-26 nos.),
    • Fire hydrant system,
    • RO Plant, STP plant above 20kld,
    • Material handling equipment like Crane, Pallet trolley Diesel forklifts& Electrical forklifts.
    • Monitoring all the parameter and keeping them under limits.
    • To Coordinate with inter & intra deptt for utilities issues.
    • Take care of premises all water pumps.
    • To Ensure smooth functioning of all utility machinery.
    • To take care of Preventive Maintenance of Utility equipment’s.
    • Maintain all the record of Preventive maintenance / Breakdown records, History cards & Critical spare.
    • To attain the day to day complaints of inter/intra dept., under the supervision of shift in charges and to rectify these complaints.
    • Do the preventive maintenance of all the utilities equipment’s as per schedule / shutdown available and maintain the respective records.
    • Maintain clean and hygienic working conditions in Utilities Area .
    • Use PPE on job.
    • Adopt safe and healthy work practices.

    go to method of application »

    Primary and Secondary Slitter Operator

    • Job Type Full Time
    • Qualification
    • Experience
    • Location Ogun
    • Job Field Engineering / Technical&nbsp

    Job Description

    • A Slitter Operator responsible for the preparation and processing of material in and out of the Slitting Operation.
    • Input data into the shop floor pc, check and validate labels are correct from computer on to the corresponding coils.

    go to method of application »

    Shift Technician (Utilities) Mechanical

    • Job Type Full Time
    • Qualification
    • Experience
    • Location Ogun
    • Job Field Engineering / Technical&nbsp

    Job Description

    • Preventive Maintenance of Utility Equipment.
    • Do all schedule preventive maintenance and maintain all the record.
    • Environment Health Safety

    To take care of Preventive Maintenance of following Utility Equipment like:

    • Centrifugal Chiller (630 Tr ) ,
    • Screw type Air Compressors (352 cfm)
    • Refrigerant type Air Dryer (352 cfm)
    • Thermic fluid heater (30 M kilo-cal/hr)
    • Cooling tower (450 *4 CMH) ,
    • Centrifugal, Screw & gear Pumps,
    • Vapor Absorption Machine (1000 Tr ) ,
    • Air handling unit (30000,24000.8000 cfm-26 nos.),
    • Fire hydrant system,
    • RO Plant, STP plant above 20kld,
    • Material handling equipment like Crane, Pallet trolley Diesel forklifts& Electrical forklifts.
    • Monitoring all the parameter and keeping them under limits.
    • To Coordinate with inter & intra deptt for utilities issues.
    • Take care of premises all water pumps.
    • To Ensure smooth functioning of all utility machinery.
    • To take care of Preventive Maintenance of Utility equipment’s.
    • Maintain all the record of Preventive maintenance / Breakdown records, History cards & Critical spare.
    • To attain the day to day complaints of inter/intra dept., under the supervision of shift in charges and to rectify these complaints.
    • Do the preventive maintenance of all the utilities equipment’s as per schedule / shutdown available and maintain the respective records.
    • Maintain clean and hygienic working conditions in Utilities Area .
    • Use PPE on job.
    • Adopt safe and healthy work practices

    go to method of application »

    Winder Operator

    • Job Type Full Time
    • Qualification
    • Experience
    • Location Ogun
    • Job Field Engineering / Technical&nbsp

    Job Description

    • Production
    • Inspection
    • Record keeping
    • Housekeeping and safety
    • Strict adherence to the specified microns during production
    • Operate machines as per the instructions received
    • Ensure adequate raw materials stock
    • Treatment of films as per the requirements
    • Check defects and ensure timely correction
    • Adherence to the winding parameters
    • Duly filling the Jumbo slip
    • Filling of the Log book with the appropriate details without failure or delay
    • Strict compliance with the safety procedures
    • Maintain hygienic working conditions

    Method of Application

    Interested and qualified candidates should send their CV to: [email protected] using the “Job Title” as the subject of the email.

  • Click Here to Leave a Comment Below 0 comments